cRIO Module Mounting Kit

€92.00*

Product number: 60000057

Product information "cRIO Module Mounting Kit"

cRIO MOBILE Mounting Kit for NI CompactRIO external mount or DIN Rail Mount. 

Details
The cRIO MOBILE mounting kit can be used to install and operate our cRIO MOBILE / WLAN(WiFi) / Switch modules outside an existing CompactRIO chassis. The kit contains an anodized aluminum bracket for mounting on the right side of a CompactRIO chassis, or to allow a mounting on DIN rails with the included DIN rail adapter. In this way there is no dedicated module slot in the chassis necessary. In essence you gain a additional free slot. 
Important notes:
  • This mounting adapter can ONLY be used with our cRIO MOBILE module series, the cRIO WiFi/WLAN modules or cRIO Switch modules, which do not require a backplane connection. Kit includes 2 mounting screws and a DIN rail adapter.
  • The mounting directly on an NI chassis is only possible if the chassis provides the required screw threads. Some chassis do not provide them (i.e. NI cRIO-9040). In this case the only available option is mounting on the DIN rail.

You may also be interested in...

SEA 9715 Ethernet Switch Module - Configuration
cRIO module with 5-port Ethernet switch for use with the NI CompactRIO™ system or R-series expansion chassis from NI™.DetailsSEA 9715 Ethernet Switch module integrates Ethernet switch functionality seamlessly into the CompactRIO platform with a 5-port unmanaged Ethernet switch with 10/100MBit/s. The module is powered via the backplane and needs no external power supply. The module needs no FPGA programming, and thus no separate cRIO FPGA space.Technical DataSwitch CharacteristicsNetwork type:  IEEE 802.3, 802.3u, 802.3xNetwork mode Switching (unmanaged)Data rate:  10/100 Mbit/sConnector type:  RJ45Number of ports:  5Power RequirementsOperating voltage:  5 VDC, ±5%Power consumption at 5 V:– Operating current in active mode:  typ. 178 mA– Operating current in sleep mode:  < 0.1 mAPhysical CharacteristicsTemperature range:  -40...+70 °CWeight:  approx. 150 gDimensions:  90 x 23 x 73 mmCompactRIO Products Home

From €523.00*

SEA 9719 802.11p Communication Module - Configuration
Supported Standards: IEEE 802.11p–2012, (ETSI ES 202 663, IEEE 1609.4–2010) Frequency bands: 5.850–5.925 GHz, channels 172, 174, 176, 180, 182, 184 Channel bandwidth: 10 MHz, OFDM Modulation Modes: 3, 4.5, 6, 9, 12, 18, 24, 27 Mbps for 10 MHz BW signal Maximum output power: 5.9 GHz: –10 to +23 dBm (± 2 dBm), 5.9 GHz: IEEE 1609 Class C Minimum sensitivity: –97 dBm @ 3 Mbps Operating temperature range: –25 to +55 °C DetailsThe SEA 9719 cRIO module enables communication according to the IEEE 802.11p standard on the NI CompactRIO™ platform. This standard provides a basis for the future Vehicle-to-Anything (V2X) or Car-to-Anything (C2X) technologies. By means of this module regular IEEE 802.11p messages (PHY & MAC layer) can be transmitted and received from within LabVIEW™ user applications. For easy integration a LabVIEW driver with a full set of API functions is available to the developer. The module is connected to a computer system (typically a NI CompactRIO) via Ethernet and the user application runs on the Real-Time controller. No LabVIEW FPGA programming is required. Optionally the module can be operated without an NI CompactRIO Controller (stand alone), by connecting it directly to a PC via Ethernet and running the user application on the PC. The required power of 7 to 30 VDC can be supplied through an adequate cable (see accessory below) from the same power source as the NI CompactRIO system.Delivery Scope1 * SEA 9719 802.11p Communication Module1 * Printed Hardware Manual operation instructions, safety instructions and specifications AccessoryGPS option (66000043) is separately available NotesFor programming and operation a LabVIEW Development Environment 2017 or higher is required (see tab Product FAQ).The software is available as a download.CompactRIO Products Home

From €2,289.00*

Tip
SEA 9744 4G Mobile Communication Module - Configuration
Not for USA and Japan! Penta-band in 4G networks: 800 / 900 / 1800 / 2100 / 2600 MHz Dual-band in 3G networks: 900 / 2100 MHz Quad-band in 2G networks: 850 / 900 / 1800 / 1900 MHz Gross data rate up to 100 Mbit/s (DL) and 50 Mbit/s (UL) via LTE Remote access via mobile network (VPN) Text messages via SMS GPS for geo-positioning, timing and synchronization Web-based configuration Operating temperature range from -25 to +60 °C    DetailsThe SEA 9744 is a high performance cRIO module for communication in mobile networks of the latest generation (4G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication all currently available standards and protocols like GPRS/EDGE (2G), UMTS/HSPA (3G) or LTE (4G) can be used. The maximum gross data transmission rates are up to 50 Mbit/sec for upload and up to 100 Mbit/sec for download in 4G (LTE) networks. The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9744 provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist. ​The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter. The module is directly connected by the Ethernet-bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.Scope of Delivery1 * SEA 9744 (60000072)1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications AccessoryEthernet-bridge cable (61000051) NotesThis module is made for worldwide operation except USA and Japan. For USA use SEA 9745.This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (e.g. NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA (see tab Product FAQ).CompactRIO Products Home

From €1,486.00*

SEA 9745 4G Mobile Communication Module - Configuration
Only for USA (AT&T, T-Mobile)! Tri-band in 4G networks: 700 / 1700 (AWS, B4) / 2100 MHz Tri-band in 3G networks: 850 / 1900 / 2100 MHz Quad-band in 2G networks: 850 / 900 / 1800 / 1900 MHz Gross data rate up to 100 Mbit/s (DL) and 50 Mbit/s (UL) via LTE Remote access via mobile network (VPN) Text messages via SMS GPS for geo-positioning, timing and synchronization Web-based configuration Operating temperature range from -25 to +60 °CDetailsThe SEA 9745 is a high performance cRIO module for communication in mobile networks of the latest generation (4G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication all currently available standards and protocols like GPRS/EDGE (2G), UMTS/HSPA (3G) or LTE (4G) can be used. The maximum gross data transmission rates are up to 50 Mbit/sec for upload and up to 100 Mbit/sec for download in 4G (LTE) networks.The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9745 provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist.​The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter.The module is directly connected by the Ethernet-bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.Scope of Delivery1 * SEA 9745 (60000070)1 * Printed hardware manual incl. operation instructions, safety guidelines and specificationsAccessory Ethernet-bridge cable (61000051)Notes This module is made for operation in USA. For other countries use SEA 9744.This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (eg NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA (see tab Product FAQ).CompactRIO Products Home

From €1,486.00*