SEA 9521 BiSS-C/SSI Encoder Interface Module - Configuration
Product number: 60000069-CFG
SEA 9521 Module
Mandatory
Reset choice
€0.00*
SEA 9521 BiSS-C/SSI Encoder Interface Module
Mandatory Accessory
Mandatory
Reset choice
€0.00*
cRIO Module Power Supply Cable 2-pin
Optional Accessory
Reset choice
€0.00*
Sensor Cable for BiSS/EnDat cRIO Modules 05m
Sensor Cable for BiSS/EnDat cRIO Modules 10m
Sensor Cable for BiSS/EnDat cRIO Modules 20m
Repair & Warranty Program
Reset choice
€0.00*
3 Year Repair & Warranty Program (add. 2 years) for SEA 9521
Product information "SEA 9521 BiSS-C/SSI Encoder Interface Module - Configuration"
cRIO BiSS-C/SSI interface module to connect up to 3 absolute digital position encoders for use with the NI CompactRIO™ system or R Series Expansion chassis.
Details
SEA 9521 BiSS Interface Module with 3 BiSS-C interfaces to connect absolute digital position encoder from various vendors for use with the CompactRIO system from NI™. The position can be readout at high speed and with digital accuracy. The build in FPGA supports BiSS clock speeds of up to 8 MHz and allows the read out of 3 channels. Besides the digital position data also sensor or calibration information can be readout or written. Module supports optional also the SSI protocol. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors.
Approved rotary encoder you can get from various vendors e.g. www.hengstler.com or www.renishaw.com.
Scope of delivery
Accessory
Details
SEA 9521 BiSS Interface Module with 3 BiSS-C interfaces to connect absolute digital position encoder from various vendors for use with the CompactRIO system from NI™. The position can be readout at high speed and with digital accuracy. The build in FPGA supports BiSS clock speeds of up to 8 MHz and allows the read out of 3 channels. Besides the digital position data also sensor or calibration information can be readout or written. Module supports optional also the SSI protocol. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors.
Approved rotary encoder you can get from various vendors e.g. www.hengstler.com or www.renishaw.com.
Scope of delivery
- 1 * SEA 9521 (60000069)
- 1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications
Accessory
- Sensor Cable for BiSS/EnDat Modules (61000607), is mandatory for the operation
| SEA Top Seller: | most popular |
|---|
Broshure Downloads "SEA 9521 BiSS-C/SSI Encoder Interface Module - Configuration"
-
What are the requirements for a development environment?
PC with the software as follows:
• JKI VI Package Manager (VIPM) – latest available version
• SEA 9521 driver software
• NI LabVIEW™ Development environment 2017 or higher
• NI LabVIEW Real-Time 2017 or higher
• NI LabVIEW FPGA 2017 or higher + suitable Xilinx tools
• NI CompactRIO™ drivers 2017 or higher -
What are the requirements for a run-time environment?
NI CompactRIO™ system with the software as follows:
• NI LabVIEW™ Run-Time Engine / LabVIEW Run-Time Engine for Real-Time targets (standard installation)
