Interfaces & Busses

cRIO BiSS-C/SSI interface module to connect up to 3 absolute digital position encoders for use with the NI CompactRIO™ system or R Series Expansion chassis.DetailsSEA 9521 BiSS Interface Module with 3 BiSS-C interfaces to connect absolute digital position encoder from various vendors for use with the CompactRIO system from NI™. The position can be readout at high speed and with digital accuracy. The build in FPGA supports BiSS clock speeds of up to 8 MHz and allows the read out of 3 channels. Besides the digital position data also sensor or calibration information can be readout or written. Module supports optional also the SSI protocol. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors.Approved rotary encoder you can get from various vendors e.g. www.hengstler.com or www.renishaw.com.Scope of delivery1 * SEA 9521 (60000069)1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications Accessory Sensor Cable for BiSS/EnDat Modules (61000607), is mandatory for the operationCompactRIO Products Home

cRIO module with 3 digital EnDat 2 interfaces to connect absolute digital position encoders from Heidenhain with the CompactRIO™ system from NI™.DetailsThe position can be readout at high speed and with digital accuracy. The build in FPGA supports EnDat Clock Speeds of up to 8 MHz and allows the synchronous read out of 3 axis in parallel. Besides the digital position data also sensor or calibration information can be readout or written. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors. Look for EnDat encoders at http://www.heidenhain.com/en_US/products-and-applications/angle-measurement/rotary-encoders/.Driver software is available via download link.Scope of delivery1 * SEA 9510 (60000006)1 * Printed hardware manual incl. operation instructions, safety guidelines and specificationsAccessorySensor Cable for BiSS/EnDat Modules (61000607), is mandatory for the operationCompactRIO Products Home

cRIO ARINC 429 module with 8 receiver channels and 1 transmitter channel for use with the NI CompactRIO™ system or R Series Expansion chassis.DetailsThe SEA 9811 ARINC 429 module is designed for use with the NI CompactRIO™ system. The module supports 8 channels for the reception  and 1 channel to send ARINC 429 telegrams. It can process high speed and low speed data rates independently for each channel type at data rates between 12.5 und 100 kbit/s.The electrical connection can be made by the front panel Sub-D connector. The ARINC buses are completely separated from the backplane by an isolation barrier, so the module isolates the backplane from surges up to 5 kV.The SEA 9811 ARINC 429 module is designed for very low power operation and retrieves its supply directly from the backplane connector, thus there is no additional external power supply necessary. The front panel has 8 LED indicators to indicate the reception of incoming ARINC data per channel.The ARINC labels can be easily retrieved, filtered or processed via the provided LabVIEW FPGA API functions. Driver software is available via download link.CompactRIO Products Home