This category contains all antennas for our cRIO modules. Antennas can be for a particular technology like GNSS or cellular, or combine multiple technologies in one enclosure. All antenna are selected and tested for best operation with our cRIO modules. Select one of the sub-categories for a specific technology.
Cellular mini stick antenna with SMA connector for direct mounting onto our cRIO MOBILE modules.DetailsMini stick/rod antenna for direct mounting onto our wireless cRIO modules. Small and compact in size they shall be used if the system is not mounted within an enclosure.
Should not be used when the complete system is mounted in a shielded case.Connector: SMABands: 900 / 1800 MHzLength: approx. 125mm Gain: 2 dBi, 0 dBd Impedance: 50 Ohm Color: black Operating temperature range: −10...50 °C
Omnidirectional cellular antenna for mounting on magnetic surfaces. Antenna with fixed cable RG174, length approx 2.6 m and SMA connector for direct connection with a cRIO MOBILE module. Use for GSM, GPRS, EDGE, UMTS, HSDPA. Frequencies 850/900/1800/1900 MHz/ UMTS, gain 2 dBi or 0 dBd. GSM antenna specially for use with the 3G NTT module version with TELEC approval. Operating temperature −20...+70 °C. Height approx. 75 mm.
Cellular Multiband Magnet Antenna SMA Male 2.5m Cable, Frequencies 850/900/1800/1900 MHz/ UMTS 2dBiDetailsOmnidirectional GSM antenna for mounting on magnetic surfaces. Antenna with fixed cable (approx. 2.5m) and SMA connector for direct connection with a cRIO GSM MOBILE module. Use for GSM, GPRS, EDGE, UMTS, HSDPA.
Active GPS Patch Antenna for mounting on magnetic surfaces.
Antenna has a fixed cable (approx. 3m) with MCX connector for direct connection with our cRIO MOBILE/GPS modules.DetailsAs the antenna has an active amplifier the power supply is done via the antenna cable directly from the CompactRIO module.
Reception of GPS L1 band 1575MHz gain of approx. 27dB (without cable loss)
Power Supply: 3.3 to 3.6V
Current: 20mA
Active GNSS antenna for mounting on magnetic surfaces with fixed cable (approx. 5 m) and MCX connector for direct connection to our cRIO GNSS modules SEA 9406.DetailsAs the antenna has an active amplifier the power supply is done via the antenna cable directly from the CompactRIO module.
Reception of L1 band (1559–1606 MHz) and L2/E5b/B2I band (1197–1249 MHz). Total gain: approx. 24.1 dBSupply voltage: 3.0–5.0 VSupply current: typ. 15 mA
Cellular/GPS Magnet-/Adhesive/Glue-Antenna for mounting inside vehicles onto glas surfaces with special glue pad. Cable length approx. 3m (RG174) with SMA and MCX right angle connectors. GPS -L1, GSM 850/900/1800/1900 MHZ/UMTS. Ideal for use with our cRIO MOBILE modules.
Special combo antenna for simultaneous reception of GPS, GSM and WLAN/WiFi (2.4 GHz) in one compact antenna with fixed cable RG174, length approx. 3 m. The antenna can be mounted through a hole. The GPS antenna provides an integrated active amplifier. The power supply is done via the antenna cable directly from our cRIO module. Supply voltage: 3.3...5 V, supply current: approx. 25 mA. Connectors: WLAN: R-SMA, GSM: SMA, GPS: MCX. Suitable for outdoor use.
Active GPS patch antenna for use with our cRIO MOBILE/GPS modules.Details Active GPS patch antenna for seaworthy outdoor use at sea or on land. Single hole mounting (14 mm) with sealing rubber. FME male connector, active amplifier, power supply via antenna connector 3.3V/25mA, gain 30dB, color white.
Active GPS patch antenna for use with our cRIO MOBILE/GPS modules.Details Active GPS patch antenna for seaworthy outdoor use at sea or on land. Single hole mounting (14 mm) with sealing rubber. FME male connector, active amplifier, power supply via antenna connector 3.3V/25mA, gain 30dB, color black.
Directional cellular antenna for outdoor usage; supports GSM protocols GSM, GPRS, EDGE, UMTS, HSDA with our cRIO MOBILE Series. Antenna has a fixed cable (approx. 5 m) and FME connector. Connection with cRIO MOBILE modules via SMA connector. Antenna can be used for areas where the network reception quality is bad. Antenna gain approx. 10 dBi (without cable loss), size approx. 162 x 142 x 45 mm.
Cellular Outdoor Rod-Antenna, Tri-Band incl. cable for use with our cRIO MOBILE modules.DetailsGSM omnidirectional rod-antenna for 900/1800/1900 MHz for outdoor usage, including fixed cable (approx. 18 m), FME connector, 2 dBi, dimensions approx. 30 cm
with mounting bracket. NoteFor usage with cRIO MOBILE modules a separately available FME-SMA adapter (61000033) is required.
Active GPS rod antenna with amplifier and filter for seaworthy outdoor use at sea or on land. Mounting on 1" threaded connector. FME male connector; Active amplifier, power supply via antenna connector 3.3V/25mA, gain 32dB, color white.
Cellular/GPS multi band roof antenna for 800/900/1800/1900/2600 UMTS/WLAN and GPS in one housing, specialized for train or bus applications. Antenna must be mounted on conductive surface with minimum size 500 mm x 500 mm on existing M10 bolts. Please order separately GPS amplifier (61000152) and cable set (61000023). Conductive plate and bolts are not included, this is just to show the mounting. Replaces 61000003.
GSM
N-Connector
Gain: 0 dBd Frequency: 806MHz ..2700MHz
GPS
TNC Connector with RG316 Cable
Gain: 2dBi Frequency: 1575.47MHz ±1MHz
Impedance: 50 Ohm
Size: 145 mm x 85mm x 81mm Weight: 500g Antenna requires additional amplifier.
Cellular Quad-Band Outdoor Antenna with stand. Frequency ranges: 800–960 MHz / 1710–1880 MHz / 1900–2200 MHz / UMTS. Connection with N-Connector. Ideal for outdoor applications. With mounting bracket 16–54 mm. Without cable.
This amplifier is a special GPS Low Noise Amplifier for use with our train roof antenna 61000610 / 61000003. Optimized for the GPS L1 band. The amplifier has to be mounted nearby the antenna. Voltage 3.3 V to 5.5 V at max. 25 mA (over antenna cable).
Technical Data:
Frequency: 1575.42 MHzGain approx.: 25 dB ± 2 dB Operating voltage: 3.3 to 5.5 V (over the antenna cable) Operating current: ≤ 25 mA Operating temperature range: −40 to +85 °C Connectors: input TNC female / output N female Dimension approx.: 70 mm x 50 mm x 22 mm Matching cable set separately available by S.E.A.
€300.00*
This website uses cookies to ensure the best experience possible. More information...
Please select your Shipping Region / Payment in US $ is only available for US customers
