Sensor Cable for BiSS/EnDat cRIO Modules 20m

€342.00*

Product number: 61000153

Product information "Sensor Cable for BiSS/EnDat cRIO Modules 20m"

Sensor cable for use with our BiSS/EnDat modules for the connection of an encoder. Per module you need up to 3 cables depending on the number of connected encoders. The cable has an 8 pin M12 connector straight on one side and has open cables on the other side. Cable length is approx. 20 m.

You may be interrested in...

Tip
SEA 9510 EnDat Encoder Interface Module - Configuration
cRIO module with 3 digital EnDat 2 interfaces to connect absolute digital position encoders from Heidenhain with the CompactRIO™ system from NI™.DetailsThe position can be readout at high speed and with digital accuracy. The build in FPGA supports EnDat Clock Speeds of up to 8 MHz and allows the synchronous read out of 3 axis in parallel. Besides the digital position data also sensor or calibration information can be readout or written. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors. Look for EnDat encoders at http://www.heidenhain.com/en_US/products-and-applications/angle-measurement/rotary-encoders/.Driver software is available via download link.Scope of delivery1 * SEA 9510 (60000006)1 * Printed hardware manual incl. operation instructions, safety guidelines and specificationsAccessorySensor Cable for BiSS/EnDat Modules (61000607), is mandatory for the operationCompactRIO Products Home

From €1,415.00*

Tip
SEA 9521 BiSS-C/SSI Encoder Interface Module - Configuration
cRIO BiSS-C/SSI interface module to connect up to 3 absolute digital position encoders for use with the NI CompactRIO™ system or R Series Expansion chassis.DetailsSEA 9521 BiSS Interface Module with 3 BiSS-C interfaces to connect absolute digital position encoder from various vendors for use with the CompactRIO system from NI™. The position can be readout at high speed and with digital accuracy. The build in FPGA supports BiSS clock speeds of up to 8 MHz and allows the read out of 3 channels. Besides the digital position data also sensor or calibration information can be readout or written. Module supports optional also the SSI protocol. The software driver access to the position data can be done directly within the LabVIEW FPGA software via IO Nodes and Method Nodes. The digital connection and power supply of the sensors can be done directly via the build in M12 connectors.Approved rotary encoder you can get from various vendors e.g. www.hengstler.com or www.renishaw.com.Scope of delivery1 * SEA 9521 (60000069)1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications Accessory Sensor Cable for BiSS/EnDat Modules (61000607), is mandatory for the operationCompactRIO Products Home

From €1,533.00*