GPS Option for SEA 9719


Product number: 66000043

Product information "GPS Option for SEA 9719"

  • Optional function for the SEA 9719 module.
  • Disciplines the internal MAC clock.
  • Is also compatible with GPS simulators.

The GPS Option for SEA 9719 cRIO module enables the GPS receiver as time source for timestamping the data packets by disciplining the internal MAC clock. Requires additionally a SEA 9719  802.11p Communication Module w/ GPS antenna.

You may also be interested in...

SEA 9719 802.11p Communication Module
Supported Standards: IEEE 802.11p–2012, (ETSI ES 202 663, IEEE 1609.4 – 2010), Frequency bands: 5.850 – 5.925 GHz, channels 172, 174, 176, 180, 182, 184, Channel bandwidth: 10 MHz, OFDM Modulation Modes: 3, 4.5, 6, 9, 12, 18, 24, 27 Mbps for 10 MHz BW signal, Maximum output power: 5.9 GHz: -10 to +23 ± 2dBm, 5.9GHz: IEEE 1609 Class C, Minimum sensitivity: -97 dBm @ 3 Mbps, Operating temperature range: -25 to +55 °CDetailsThe SEA 9719 cRIO module enables communication according to the IEEE 802.11p standard on the NI CompactRIO platform. This standard provides a basis for the future Vehicle-to-Anything (V2X) or Car-to-Anything (C2X) technologies. By means of this module regular IEEE 802.11p messages (PHY & MAC layer) can be transmitted and received from within LabVIEW user applications. For easy integration a LabVIEW driver with a full set of API functions is available to the developer. The module is connected to a computer system (typically a NI CompactRIO) via Ethernet and the user application runs on the Real-Time controller. No LabVIEW FPGA programming is required. Optionally the module can be operated without an NI CompactRIO Controller (stand alone), by connecting it directly to a PC via Ethernet and running the user application on the PC. The required power of 7 to 30 VDC can be supplied through an adequate cable (see accessory below) from the same power source as the NI CompactRIO system.Delivery Scope 1 * SEA 9719 802.11p Communication Module 1 *Printed Hardware Manual operation instructions, safety instructions and specifications AccessoryPower cable (61000011) is mandatory for operationGPS Option (66000043) is separately available Notices For programming and operation a LabVIEW Development Environment 2014 or higher is required The software is delivered as a download via our download siteMore Information