Cellular/GPS/WLAN Combo Antenna with 3m Cable

€98.00*

Product number: 61000087

Product information "Cellular/GPS/WLAN Combo Antenna with 3m Cable"

Special combo antenna for simultaneous reception of GPS, GSM and WLAN/WiFi (2.4 GHz) in one compact antenna with fixed cable RG174, length approx. 3 m. The antenna can be mounted through a hole. The GPS antenna provides an integrated active amplifier. The power supply is done via the antenna cable directly from our cRIO module. Supply voltage: 3.3..5 V, supply current: approx. 25 mA. Connectors: WLAN: R-SMA, GSM: SMA, GPS: MCX. Suitable for outdoor use.

You may also be interested in...

EOL
SEA 9741 3G Mobile Communication Module - Kit
Tri-band in 3G networks: 850 / 1900 / 2100 MHz,Quad-band in 2G networks: 850 / 900 / 1800 / 1900 MHz,Gross data rate up to 14.4 Mbit/s (DL) and 5.76 Mbit/s (UL) via HSPA+,Remote access via mobile network (VPN),Text messages via SMS,GPS for geo-positioning, timing and synchronization,Web-based configurationOperating temperature range from -30 to +70 °CDetailsThe SEA 9741 is a high performance cRIO module for communication in modern mobile networks of the 3rd. generation (3G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication the majority of currently available standards and protocols like GPRS/EDGE (2G) or UMTS/HSPA (3G) can be used. The maximum gross data transmission rates are up to 5.76 Mbit/sec for upload and up to 14.4 Mbit/sec for download in 3G (HSPA+) networks. The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9741 provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist.​ The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter. The module is directly connected by the Ethernet-bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.Scope of Delivery1 * SEA 97411 * Printed hardware manual incl. operation instructions, safety guidelines and specifications 1 * Power cable (61000011), is mandatory for the operationAccessoryEthernet-bridge cable (61000051)NotesThis module is suitable for worldwide operation except Japan. For Japan use SEA 9724.This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (eg NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA. More Information

From €1,214.00*

Bestseller
% SALE %
SEA 9744 4G Mobile Communication Module - Kit
Not for USA and Japan!,Penta-band in 4G networks: 800 / 900 / 1800 / 2100 / 2600 MHz,Dual-band in 3G networks: 900 / 2100 MHz,Quad-band in 2G networks: 850 / 900 / 1800 / 1900 MHz,Gross data rate up to 100 Mbit/s (DL) and 50 Mbit/s (UL) via LTE,Remote access via mobile network (VPN),Text messages via SMS,GPS for geo-positioning, timing and synchronization,Web-based configuration,Operating temperature range from -25 to +60 °C    DetailsThe SEA 9744 is a high performance cRIO module for communication in mobile networks of the latest generation (4G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication all currently available standards and protocols like GPRS/EDGE (2G), UMTS/HSPA (3G) or LTE (4G) can be used. The maximum gross data transmission rates are up to 50 Mbit/sec for upload and up to 100 Mbit/sec for download in 4G (LTE) networks. The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9744 provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist. ​The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter. The module is directly connected by the Ethernet-bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.Scope of Delivery1 * SEA 9744 (60000072)1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications 1 * Power cable (61000011), is mandatory for the operationAccessoryEthernet-bridge cable (61000051) NotesThis module is made for worldwide operation except USA and Japan. For USA use SEA 9745. For Japan use SEA 9724. This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (eg NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA.More Information

From €994.00*

Bestseller
% SALE %
SEA 9745 4G Mobile Communication Module - Kit
    Only for USA (AT&T, T-Mobile)!,    Tri-band in 4G networks: 700 / 1700 (AWS,B4) / 2100 MHz,    Tri-band in 3G networks: 850 / 1900 / 2100 MHz,    Quad-band in 2G networks: 850 / 900 / 1800 / 1900 MHz,    Gross data rate up to 100 Mbit/s (DL) and 50 Mbit/s (UL) via LTE,    Remote access via mobile network (VPN),    Text messages via SMS,    GPS for geo-positioning, timing and synchronization,    Web-based configuration,    Operating temperature range from -25 to +60 °CDetailsThe SEA 9745 is a high performance cRIO module for communication in mobile networks of the latest generation (4G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication all currently available standards and protocols like GPRS/EDGE (2G), UMTS/HSPA (3G) or LTE (4G) can be used. The maximum gross data transmission rates are up to 50 Mbit/sec for upload and up to 100 Mbit/sec for download in 4G (LTE) networks.The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9745 provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist.​The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter.The module is directly connected by the Ethernet-bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.Scope of Delivery1 * SEA 9745 (60000070)1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications1*  Power Cabel 61000011,  is mandatory for the operationAccessory Ethernet-bridge cable (61000051)Notes This module is made for operation in USA. For other countries use SEA 9744. For Japan use SEA 9724.This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (eg NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA.

From €994.00*