GNSS Antenna Multi-band (L1, L2/E5b/B2I) with 5m Cable

€99.00*

Product number: 61000173

Product information "GNSS Antenna Multi-band (L1, L2/E5b/B2I) with 5m Cable"

Active GNSS antenna for mounting on magnetic surfaces with fixed cable (approx. 5 m) and MCX connector for direct connection to our cRIO GNSS modules SEA 9406.

Details
As the antenna has an active amplifier the power supply is done via the antenna cable directly from the CompactRIO module. Reception of L1 band (1559–1606 MHz) and L2/E5b/B2I band (1197–1249 MHz).
Total gain: approx. 24.1 dB
Supply voltage: 3.0–5.0 V
Supply current: typ. 15 mA

You may also be interested in...

SEA 9406 Multi GNSS High Precision Module w/o Sensor - Configuration
A highly sensitive 184-channel receiver with concurrent GNSS constellations Built-in support for standard RTCM corrections via Network RTK (NTRIP) Centimeter-level position accuracy with <0.2 m (w/ RTK) and 1.5 m CEP (w/o RTK) GNSS data with up to 20 Hz update rate Configurable time pulse signal (TP/PPS) in FPGA or directly on module's front connector (SYNC OUT) Backup battery for fast cold starts (approx. 3 s) Operating temperature range -25 to +65 °C (can be extended to -40 to +85 °C by omitting the backup battery) Details The SEA 9406 is a cRIO module for timing, synchronization and geopositioning using the Global Navigation Satellite System (GNSS). The highly sensitive 184-channel receiver allows a concurrent reception of GPS, GLONASS, Galileo, BeiDou satellite signals and delivers the data with up to 20 Hz. The GNSS data is parsed and delivered within the FPGA through I/O and property nodes to the user. In addition to this NMEA messages can be passed to the real-time controller for further processing. Beside this, the module provides a time pulse signal (TP/PPS) which can be used inside the FPGA or directly through the module’s connector SYNC OUT. Thanks to numerous FPGA method nodes the SEA 9406 module is highly configurable which allows a wide range of applications. The SEA 9406 is offered in two variants: standard (w/o sensor) and with an additional IMU sensor plus an interface for an external wheel tick sensor. The sensor integration enables navigation in challenging environments where the satellite signal reception is poor. Note for variant with sensor: In order to take advantage of the sensor fusion an external wheel tick sensor is required (not included with the module).The battery enables the buffering of operating data (like almanac data) while the module is switched off. This allows a fast cold start (approx. 3 s) of the module. Optionally (subject to charge) the backup battery can be omitted to extend the operating temperature range to -40 to +85 °C. System Requirements See tab Product FAQScope of Delivery 1 * SEA 9406 without sensor (60000097) 1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications Accessories GNSS antenna, is mandatory for the operation. Matching GNSS antennas are available in our web shop. CompactRIO Products Home

From €1,676.00*

SEA 9406 Multi GNSS High Precision Module with Sensor - Configuration
Integrated IMU-Sensor for more precise navigation in challenging environments A highly sensitive 184-channel receiver with concurrent GNSS constellations Built-in support for standard RTCM corrections via Network RTK (NTRIP) Centimeter-level position accuracy with <0.2 m (w/ RTK) and 1.5 m CEP (w/o RTK) GNSS data with up to 20 Hz update rate Configurable time pulse signal (TP/PPS) in FPGA or directly on module's front connector (SYNC OUT) Backup battery for fast cold starts (approx. 3 s) Operating temperature range -25 to +65 °C (can be extended to -40 to +85 °C by omitting the backup battery) Details The SEA 9406 is a cRIO module for timing, synchronization and geopositioning using the Global Navigation Satellite System (GNSS). The highly sensitive 184-channel receiver allows a concurrent reception of GPS, GLONASS, Galileo, BeiDou satellite signals and delivers the data with up to 20 Hz. The GNSS data is parsed and delivered within the FPGA through I/O and property nodes to the user. In addition to this NMEA messages can be passed to the real-time controller for further processing. Beside this, the module provides a time pulse signal (TP/PPS) which can be used inside the FPGA or directly through the module’s connector SYNC OUT. Thanks to numerous FPGA method nodes the SEA 9406 module is highly configurable which allows a wide range of applications. The SEA 9406 is offered in two variants: standard (w/o sensor) and with an additional IMU sensor plus an interface for an external wheel tick sensor. The sensor integration enables navigation in challenging environments where the satellite signal reception is poor. Note for variant with sensor: In order to take advantage of the sensor fusion an external wheel tick sensor is required (not included with the module).The battery enables the buffering of operating data (like almanac data) while the module is switched off. This allows a fast cold start (approx. 3 s) of the module. Optionally (subject to charge) the backup battery can be omitted to extend the operating temperature range to -40 to +85 °C. System Requirements See tab Product FAQScope of Delivery 1 * SEA 9406 with sensor (60000098) 1 * Printed hardware manual incl. operation instructions, safety guidelines and specifications Accessories GNSS antenna, is mandatory for the operation. Matching GNSS antennas are available in our web shop.CompactRIO Products Home

From €2,262.00*